我們先從2系列談起，該系列合金鋁板內部銅含量高，可熱處理，屬于硬鋁合金。通常在各種模具和機械行業使用。3系列是鋁錳合金，屬于價格比較便宜的合金，尤其是3003合金鋁板屬于合金鋁板里面價格比較低的產品，內部合金含量錳合金比價高，而5系鋁板也屬于防銹鋁，但是價格要比3系高，該系列的合金硬度更高，防銹性能更好。六系合金屬于鋁鎂硅合金，內部含有一定的鎂合金和硅合金，焊接性能不錯，在釬焊方面有較大的應用，非常指出的是該系列合金可淬火加工為T6狀態，切削銑磨加工不錯。
Let's start with series 2. This series of alloy aluminum plate has high copper content and can be heat treated. It belongs to hard aluminum alloy. It is usually used in various mold and machinery industries. Series 3 is aluminum manganese alloy, which is relatively cheap. In particular, 3003 alloy aluminum plate is a product with relatively low price in alloy aluminum plate, and the internal alloy content is higher than that of manganese alloy. While Series 5 aluminum plate is also antirust aluminum, but the price is higher than that of series 3. This series has higher alloy hardness and better antirust performance. The six series alloy is an aluminum magnesium silicon alloy, which contains a certain amount of magnesium alloy and silicon alloy. It has good welding performance and has great application in brazing. In particular, it is pointed out that this series of alloys can be quenched to T6 state and good cutting and milling processing.

鋁板是以A00鋁錠為質料生產的產品,在消融鋁錠的時分在內部加入各種合金錠,從而得到合金鋁板.消融鋁錠的時分各種合金含量的份額關于合金鋁板的質量影響重大,下面我們就看一下合金鋁板廠家關于合金鋁板合金含量的控制.
Aluminum plate is a product made of A00 aluminum ingot. When melting aluminum ingot, various alloy ingots are added inside to obtain alloy aluminum plate. The share of various alloy content at the time of melting aluminum ingot has a significant impact on the quality of alloy aluminum plate. Let's take a look at the control of alloy content of alloy aluminum plate by alloy aluminum plate manufacturers
合金鋁板廠家對合金含量的投入必 須需按照標準里邊規則的來進行添加.需求注意的合金含量并不一定多多益善,所以在添加過程中不能超過規則的合金含量上限,假如超過了上限就屬于不合格產品了.假如不小心添加的數量多了則還需求投入鋁錠進行稀釋,假如投入的份額少了則投入相應的合金錠來進步合金含量.合金鋁板正是由于含有了各種不同份額的合金從而擁有了不同的力學性能和化學特性.
Alloy aluminum plate manufacturers must add the alloy content according to the rules in the standard. The alloy content that needs to be paid attention to is not necessarily the more the better, so the upper limit of the regular alloy content cannot be exceeded in the addition process. If the upper limit is exceeded, it will belong to unqualified products. If the quantity added accidentally is more, it is also necessary to input aluminum ingots for dilution, If the input share is less, the corresponding alloy ingots are input to improve the alloy content. The alloy aluminum plate has different mechanical and chemical properties because it contains various alloys with different shares