防銹鋁板進行電鍍時,因為受到鋁的特殊性能的影響,需要有特殊的前處理,而這些前處理因不同防銹鋁板和不同制件狀況而需要有所調整,不能簡單沿用通用工藝.因而,對于從事防銹鋁板上電鍍的工作者,有時需要做防銹鋁板電鍍前處理的實驗.
Due to the special properties of aluminum, special pretreatment is needed when the antirust aluminum plate is electroplated. However, the pretreatment needs to be adjusted due to different antirust aluminum plates and different parts conditions, so the general process can not be used simply. Therefore, for the workers engaged in electroplating on antirust aluminum plate, sometimes it is necessary to do the pre-treatment experiment of antirust aluminum plate
鋁卷生產廠家
Aluminum coil manufacturer
進行防銹鋁板電鍍前的處理方案的實驗,也是系統(tǒng)化的比照實驗,需要對樣件進行不同選定前處理工藝的處理,然后進行相同的電鍍加工,再檢測其結合力.這種比照實驗的要點是要保證除了差別工藝點外,其他流程都是同一條件的,否則就沒有了可比性而無法做出評價.

It is also a systematic comparison experiment to carry out the treatment scheme experiment of antirust aluminum plate before electroplating. Different pretreatment processes are selected for the sample, and then the same electroplating process is carried out. The key point of this comparison experiment is to ensure that except for the difference process points, other processes are under the same conditions, otherwise there is no comparability and evaluation can not be made
前處理工藝的選型和改進的辦法的設計.鋁圓片電鍍前處理包括除油、酸蝕、化學鍍或置換鍍、預鍍等四個重要工序.其中較為關鍵是化學鍍或置換鍍,因而,常常要做的實驗都集中在這道工序上.當然不同的鋁材和不同的加工辦法對前處理有不同的要求,比方壓鑄鋁件與軋制鋁件的前處理就有很大區(qū)別,而即使是同一種加工方法,不同的鋁材也有不同的前處理工藝,比方鋁的含銅量的多少就直接影響其鍍層的結合力.
The pretreatment of aluminum wafer electroplating includes four important processes: degreasing, acid etching, electroless plating or displacement plating, and pre plating. Among them, electroless plating or displacement plating is the most important process. Therefore, the experiments often need to be done are concentrated on this process. Of course, different aluminum materials and different processing methods have different requirements for pretreatment, For example, the pre-treatment of die-casting aluminum parts and rolling aluminum parts is very different. Even if the same processing method is used, different aluminum materials also have different pretreatment processes. For example, the copper content of aluminum directly affects the adhesion of the coating
鍍鋅鋁板特點：
Features of galvanized aluminum sheet:
1、鍍鋁鋼板具有出彩佳的耐高溫性（550度）。
1. Aluminum plated steel plate has excellent high temperature resistance (550 degrees).
2、鍍鋁鋼板可反射80%的入射熱量。
2. It can reflect 80% of the incident heat.
3、鍍鋁鋼板的機械強度與其基材的機械強度一致。
3. The mechanical strength of aluminized steel plate is consistent with that of its substrate.
4、鍍鋁鋼板對化學腐蝕有出眾的耐蝕性。
4. Aluminized steel plate has strong corrosion resistance to chemical corrosion.
5、可進行拉伸、沖壓、拉管等成形加工。
5. It can be used for drawing, stamping and tube drawing.
6、可用標準MAG和TIG焊接加工。
6. Standard MAG and TIG welding can be used.
7、可直接接觸食物。
7. Direct contact with food.