鋁的比熱容為0.88×103 J/(kg·℃)，熔點為660.37。鋁的熔化熱為3.98×105J/kg，鋁的蒸發熱為1.05×107J/kg。熔化熱:單位質量晶體物質在熔點從固相到液相吸收的相變潛熱。晶體的熔化是粒子由規則排列變?yōu)椴灰?guī)則排列的過程。
　　The specific heat capacity and melting point of aluminium are 0.88 *103 J/(kg * C) and 660.37 respectively. The melting heat of aluminium is 3.98 x 105J/kg and the evaporation heat of aluminium is 1.05 x 107J/kg. Melting heat: Latent heat of phase transition absorbed by crystalline substances per unit mass at melting point from solid phase to liquid phase. The melting of crystals is a process in which particles are arranged irregularly instead of regularly.
　　這些熱量將用于對分子引力,分子勢能增加,也就是說,吸收的熱量材料所需要的能量破壞晶格結構,使分子運動狀態改變質變的固體分子熱運動的液體分子熱運動,和改變材料的狀態。所以晶體不僅有一個固定的熔點，而且需要吸收一定的熱量才能熔化。由于晶體空間的晶格結構隨物質的不同而不同，所以不同物質熔化時吸收的熱量雖然質量相同，但并不相同。

　　These heat will be used to increase molecular gravity and potential energy. That is to say, the energy required by the absorbed heat material will destroy the lattice structure, change the thermal motion of liquid molecules in the thermal motion of the qualitative solid molecules, and change the state of materials. So the crystal not only has a fixed melting point, but also needs to absorb a certain amount of heat to melt. Because the lattice structure of crystal space varies with the material, the heat absorbed by different substances during melting is not the same, although the mass is the same.
　　熔解熱被用來表示晶體物質的這種性質。它表示固體物質在其熔點完全融化為相同溫度的液體所需要的單位質量的熱量;當物質凝固時，在冰點，它也等于單位質量的相同液體物質轉化成晶體所釋放的熱量。如果是熔化熱，或者m是物質的質量，或者Q是熔化所需的熱量，那么的單位是焦耳每克或者焦耳每千克。高熔點物體的熔化熱難以測量，而低熔點物體的熔化熱可以用量熱計測量。
　　Melting heat is used to represent this property of crystalline materials. It denotes the heat per unit mass required for a solid to melt completely into a liquid at its melting point at the same temperature; when a solid solidifies, at freezing point, it equals the heat released by the transformation of the same liquid material per unit mass into crystals. If it's the heat of fusion, or m is the mass of the material, or q is the heat required to melt, then the unit is joule per gram or joule per kilogram. The melting heat of high melting point objects is difficult to measure, while that of low melting point objects can be measured by calorimeter.
　　以上是鋁板生產廠家為大家介紹的相關內容，本文來源：http://m.ssstlc.com
　　Above is the related content introduced by the aluminium plate manufacturer. The source of this article is as follows: